CHANGE TO PARTIAL CERTIFICATE FROM 20 June 2025:
What will change? The registration of alloy wheels via new parts certificates (TGA) will no longer be necessary in future. Instead, approvals via the general operating permit (ABE) or parts type approval (TTG) will be required.For many, this means a major change, but not for BORBET aftermarket customers:
Almost our entire range of rims already has ABE or ECE approvals. These will remain in place and will be updated.
Transition period: Existing TGAs can still be used until 20 June 2028.
Our sales team is on hand to provide expert technical advice.
BORBET stands for tested quality, reliable standards and personal service.
DIFFERENCE BETWEEN PARTS CERTIFICATE & ABE
The difference between a parts certificate and an ABE is that an ABE may NOT require TÜV registration (although this depends on the vehicle and the tyre sizes used). If conditions such as "reworking" or similar must be observed, wheels with an ABE must also be registered. In the case of parts certificates, the wheels must always be registered, even if no conditions have to be met. The advantage of the parts certificate is that it is available much more quickly (especially for new cars) than a complete ABE update.
ECE
In contrast to the ABE, the ECE is an international approval that is recognised by many countries worldwide. The approval number for wheels is R124. With the ECE, the size, width, bolt circle, offset (ET) and hub bore are identical to the original rim from the respective manufacturer. These are prerequisites for approval. Other aspects such as the center cap, wheel load capacity, the wheel mounting on the vehicle and ensuring that all of the manufacturer's brakes fit are not included in the ECE regulation. The ECE requirements in the respective appendix must also always be checked in advance.
COC-DOCUMENTS
The CoC document must be attached to every vehicle that corresponds to the approved type: It must therefore be handed over when a new car is purchased. The manufacturer uses it to prove that the car complies with EU standards, i.e. that it has EU type approval. CoC is the abbreviation for "Certificate of Conformity".
German CoCs usually say "EG-Übereinstimmungsbescheinigung", in other countries the document is written in the respective national language. (source ADAC)
BORBET WHEELS IN WINTER
Are BORBET wheels suitable for winter? Absolutely! BORBET wheels are characterised by their high quality and durability, even in winter conditions. With specially labelled winter rims, you can defy ice, snow and salt. Find out everything you need to know about the correct selection and handling of BORBET winter rims in our FAQs. This will keep you safe and stylish on the road, even in the cold season.
LIGHT ALLOY WHEELS IN WINTER
On our website, all wheels that can be safely driven in winter are labelled with this system.to the range
SNOW CHAINS
In principle, a snow chain can be fitted to any BORBET wheel. The usability can be found in the respective expert opinion and depends on the vehicle, wheel and tyre size.to the configurator
Is there anything I need to bear in mind when it comes to wheel rims for motorhomes?
We also have wheels for motorhomes, campers and vans in our range. These wheels impress above all with their robustness and high wheel loads. Discover the complete BORBET range here:
BORBET Caravan range
BORBET Caravan range
ARE THERE ALSO BORBET OFF-ROAD WHEELS?
BORBET offers a selection of high-quality off-road wheels that impress with both their striking appearance and high load capacity. Our off-road wheels have been specially developed for demanding off-road driving and offer the perfect combination of stability and design. They are ideal for vehicles equipped with off-road tyres such as Loder or BF Goodrich.
Whether you are looking for a robust solution for your off-road adventures or a sporty look for your everyday driving, you will find the right rims here. Further information and models can be found here: BORBET Offroad wheels
Whether you are looking for a robust solution for your off-road adventures or a sporty look for your everyday driving, you will find the right rims here. Further information and models can be found here: BORBET Offroad wheels
DO YOU ALSO HAVE 24-INCH ALUMINIUM WHEELS IN YOUR RANGE?
We offer 24-inch alloy wheels, including the popular BORBET TF wheels in sizes 10.5x24 inches. These 24-inch car wheels not only impress with their striking appearance in black rim polished and graphite polished glossy, but also with their high stability and load capacity. Particularly suitable for SUVs, these wheels offer a high wheel load and are ideal for demanding journeys. Our 24-inch alloy wheels are made in Germany and meet the highest quality standards.
Can I drive larger wheels on my vehicle than those specified in the COC documents?
Yes, whether this combination of wheel and tyre requires additional registration by a testing organisation ultimately depends on whether a parts certificate or an ABE (general type approval) exists for it.
What does KBA number stand for?
The KBA number is a number assigned by the Federal Motor Transport Authority to all parts approved for use on German roads. BORBET rims always have a KBA number moulded near the valve hole, visible from the outside.
This ensures that the part is a so-called ‘mass-produced part’, which guarantees TÜV registration even after many years.
It also forms the basis for the ABE (general type approval). Only if this is available is it possible to drive wheels without separate registration by the TÜV.
This ensures that the part is a so-called ‘mass-produced part’, which guarantees TÜV registration even after many years.
It also forms the basis for the ABE (general type approval). Only if this is available is it possible to drive wheels without separate registration by the TÜV.
How do you check the KBA number on wheel wheels?
To check the KBA number of a wheel rim, look for the embossed number on the rim, usually near the valve hole. This number is a crucial factor in ensuring that the rim complies with legal requirements and is approved for road use.
How does offset work?
The offset is the distance between the centre of the wheel and the wheel mounting surface. It determines how far a wheel protrudes inwards or outwards.
Multiflex Set I Mounting Set
The Multiflexset I mounting kit ensures safe and correct mounting of the wheels on the vehicle. It contains wheel bolts or wheel nuts and, if necessary, centring rings to match the rim bore and vehicle. Please refer to the certificate for the exact dimensions, item numbers and tightening torque.
OUR OFFER. YOUR ADVANTAGE.
Discover the world of BORBET with our practical dealer search, which allows you to quickly find authorised sales partners in your area. Buy high-quality wheels directly on site and experience first-class service and outstanding quality at first hand. Do you need additional accessories? Just a click away you will find a wide selection of high-quality items that are perfectly matched to our products.If you can't find what you're looking for or have any specific questions, our team is always available to help:
+ 49 2984 301160
export@borbet.de
BORBET DEALERS - BUY WHEELS DIRECTLY
Use our dealer search to find authorised BORBET dealers in your area and purchase high-quality wheels directly. Experience quality and service at first hand.
find out more
BORBET ACCESSORIES
Discover the high-quality BORBET accessories. Whether hub caps, centring rings or stylish emblems. Visit our shop and give your vehicle a personalised touch.
to the accessories shop
